Tips on Preparing Drywall for New Coats of Paint

Worker painting the white walls

Painting home interiors can be quite challenging, but exciting at the same time. With the correct technique and equipment, you will have a satisfactory outcome.

Nevertheless, drywall contractors in Salt Lake City will insist that preparation is equally important; that how well you prepare the area determines the success of your DIY-house painting project. Are you ready to hear out expert advice?

Yielding amazing results with wall repairs

All the things you need to prepare a wall for a few new coats of paint you will find in a home improvement store. If you are making a list at this time, place drywall compound powder on the list. All you need is a specific amount of water, which the label should provide.

When the material hardens, you can paint over it without the filler shrinking or wrinkling. It dries very well and allows you to create a seamless wall surface for interior painting. You may use the mixture to repair cracks and holes.

The compound is a good filler for both small and big holes. To find small flaws, use a flashlight after turning off the lights and closing up the room against the sun. Make sure you have every spot covered. The handiest tool for filling holes and fixing the surface is a putty knife.

So, what it the definitive solution for big cracks? Joint compound may not prove to be sufficient for bigger cracks. If you find one on the wall that needs a new coat of paint, repair using fiberglass drywall tape and a taping knife.

The compound goes into the negative space, and afterward, you press the tape down on the mouth of the crack, to squeeze out every ounce of excess compound.

Ensuring a smooth and clean surface

Construction worker sanding the wallAnother important aspect of drywall preparation is sanding. All you need is a sanding block and high-quality sandpaper. Sanding will take time if the quality of the materials you use is subpar.

You must consider wearing personal protective equipment as well to protect your skin and lungs from the fibers and dust produced. Sanding is physical labor, and your hands would show the brunt of the work if you don’t use protective gear.

Preventing stains in the interior

You don’t want wet paint all over the floor or nearby wall areas when painting. If you neglect to prepare the setup you might have to deal with blobs or droplets of paint splattered everywhere.

Instead of using thin rugs, utilize canvas drop cloths. They have the capacity to absorb splatters. Find a cloth cut a few feet wide. Just ensure coverage of the entire length of the floor you want to occupy.

Is this your first time to paint a room in the house? Remember to clean to the wall in order to create a smooth and clean finish afterward.

Use the tools and materials recommended by experts when preparing the wall for new coats of paint. If you do a good job, you will be so proud of your achievement.